{"product_id":"ac-infinity-cloudforge-humidifier","title":"AC Infinity Cloudforge Humidifier","description":"\u003cp\u003eThe AC Infinity Cloudforge Humidifier is a purpose-built environmental humidifier for grow tents, grow rooms and greenhouses. Its corded probe reads temperature, relative humidity and vapour pressure deficit at canopy level, while the onboard controller uses those readings to trigger moisture instead of running blindly until the tank empties. AUTO responds when relative humidity falls, and VPD mode responds when vapour pressure deficit rises, with ten output levels available to set how gently or quickly moisture is added. This makes the Cloudforge useful as a standalone climate-control tool rather than just a mist source. Both stocked versions share the same sensing and programming platform. The choice between them comes down to reservoir capacity, required output and delivery hardware, with the exact T3 and T7 figures kept in Technical Specifications.\u003c\/p\u003e\u003cp\u003eThe EC ultrasonic vaporiser creates a fine mist by digitally pulsing water, with output adjustable across ten levels. The corded sensor can be routed to the part of the canopy that matters, avoiding the misleading reading that can come from measuring beside the humidifier or outside the growing zone. Along with automatic humidity and VPD triggers, the onboard controls provide continuous operation, a countdown timer and a repeating cycle. The ON level also sets the maximum used by triggered modes, while the OFF level sets their minimum; setting OFF to zero is necessary when a true shutoff is wanted. Temperature and humidity calibration, plus a leaf offset, allow the displayed readings and VPD calculation to be tuned to the growing space. The backlit display can then be locked and switched off while its program continues in the background.\u003c\/p\u003e\u003cp\u003eCloudforge is built for damp grow-room work. AC Infinity describe the body as specially sealed for water resistance, while the probe and UIS connections use gaskets to help protect the ports from liquid and dust. Low-water protection pauses programming until the tank is refilled, and a tilt fail-safe does the same if the unit moves more than 20 degrees from upright. It can run entirely from the onboard interface or connect through the included UIS cord to the \u003ca href=\"https:\/\/www.hydrooasis.com.au\/products\/ac-infinity-ai-environmental-controller\" target=\"_blank\" title=\"AC Infinity Ai+ Environmental Controller\" rel=\"noopener\"\u003eController Ai+\u003c\/a\u003e for app-based schedules, alerts and coordinated climate control.\u003c\/p\u003e\u003cp\u003eGood humidification still depends on air movement and extraction. The delivery hardware directs mist into the growing area, but it is not a substitute for circulation across the canopy; a \u003ca href=\"https:\/\/www.hydrooasis.com.au\/products\/ac-infinity-cloudray-s-oscillating-clip-fan\" target=\"_blank\" title=\"AC Infinity Cloudray S Oscillating Axial Clip Fan\" rel=\"noopener\"\u003eCloudray S\u003c\/a\u003e can help spread moisture instead of allowing it to settle around the outlet. A \u003ca href=\"https:\/\/www.hydrooasis.com.au\/products\/ac-infinity-cloudline-pro-t\" target=\"_blank\" title=\"AC Infinity Cloudline Pro T Mixed-Flow Inline Fan\" rel=\"noopener\"\u003eCloudline Pro T\u003c\/a\u003e provides the other half of humidity control by exhausting surplus moisture when conditions climb past the target. AC Infinity publish no room-size rating for the T3 or T7, so selection is better based on required output, refill frequency and how the vapour needs to be delivered. Their maximum-runtime figures also lack a stated output level and should not be read as continuous full-output runtime. Reservoir water should be exchanged at least every four days, with the base and nebuliser cleaned weekly to keep mineral build-up and debris from reducing performance.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e AC Infinity specify distilled water only and warn against pouring water into the central pipe. Any flexible hose must rise towards the grow space and must not be bent into a U-shape. A low section can collect water, block vapour and send water back into the base, while a downward slope allows condensation to drip from the hose. Dry the hose after each use, and unplug the humidifier before cleaning, servicing or moving it.\u003c\/em\u003e\u003c\/p\u003e","brand":"AC Infinity","offers":[{"title":"4.5 L","offer_id":48083215515806,"sku":"819137023611","price":144.99,"currency_code":"AUD","in_stock":true},{"title":"15 L","offer_id":48083215548574,"sku":"819137023628","price":329.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/5261\/6094\/files\/AC_Infinity_CLOUDFORGE_T3_Humidifier.png?v=1778983836","url":"https:\/\/www.hydrooasis.com.au\/products\/ac-infinity-cloudforge-humidifier","provider":"Hydro Oasis","version":"1.0","type":"link"}