Visit Us In-Store: 2/322 Hobart Rd, Youngtown TAS
AC Infinity Hydroponic Meter Pro Kit (pH & EC)
The AC Infinity Hydroponic Meter PRO is a professional five-parameter water testing pen designed to provide precise, fast readings of pH, electrical conductivity (EC), total dissolved solids (TDS), temperature, and salinity from a single compact instrument. Built around a lithium glass membrane sensor probe that delivers ±0.01 pH accuracy, it eliminates the need for separate pH and EC pens in the grow room, simplifying routine solution checks without sacrificing the precision serious growers require.
The meter is housed in an IP67-rated waterproof and dustproof body, sealed against moisture ingress, heat, and debris. A built-in protective sensor shield guards the glass membrane between uses, preventing accidental damage during storage and transport. The probe is fully interchangeable, meaning when accuracy degrades after 1-3 years of use, only the probe assembly requires replacement rather than the entire instrument, reducing long-term cost of ownership significantly. An AUTO-HOLD function locks the reading once it is stable for more than 10 seconds, and the meter shuts off automatically after 8 minutes of inactivity to conserve battery life.
Every kit ships with a complete calibration set: pH 4.00 and 7.00 buffer solutions, 12.88 mS and 1413 µS EC calibration solutions, and a 3M KCL storage solution to keep the probe hydrated and accurate between sessions. Compatible with hydroponics, coco, soil, aquariums, pools, and spas, the Hydroponic Meter PRO suits any application where water quality directly affects plant health or yield. For a grower mixing a fresh batch of nutrient solution before a reservoir change, a single dip of the PRO confirms pH, EC, and temperature in one step before the feed begins.
A five-parameter water testing pen measuring pH, EC, TDS, temperature, and salinity with ±0.01 accuracy, an interchangeable probe, and a full calibration kit included.
5-in-1 Measurement
pH, EC, TDS, temperature, and salinity from a single pen.
±0.01 pH Accuracy
Lithium glass membrane delivers fast, precise, stable readings.
Replaceable Probe
Swap the probe to extend instrument life without buying a new meter.
Back-Order
2 Years warranty · 30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.
AC Infinity Hydroponic Meter Pro Kit (pH & EC)
Key Highlights
expand_more
Key Highlights
- Measures pH, EC, TDS, temperature, and salinity in a single pen instrument
- Lithium glass membrane probe delivers ±0.01 pH accuracy with fast, stable readings
- IP67-rated housing sealed against moisture, dust, heat, and debris
- Interchangeable probe assembly extends instrument lifespan and reduces replacement cost
- Probe lifespan of 1-3 years depending on use frequency and maintenance
- Protective sensor shield prevents glass membrane damage between uses
- AUTO-HOLD locks the reading when stable; auto shut-off after 8 minutes of inactivity
- Ships with pH 4.00, pH 7.00, 12.88 mS, and 1413 µS calibration solutions plus 3M KCL storage solution
Directions for Use
expand_more
Directions for Use
- Remove the protective sensor shield before use.
NOTE: small water droplets inside the probe cap are normal. This is standard practice during production to maintain probe moisture and does not indicate a used product. - Power on the meter by pressing the power button.
Before first use and monthly thereafter, calibrate the pH sensor using the included pH 4.00 and pH 7.00 buffer solutions, and calibrate EC using the included 1413 µS solution. - Rinse the probe tip with clean water before submerging it into the solution you wish to test.
- Submerge the probe tip into the solution to at least the minimum immersion depth. Do not fully submerge the entire meter body.
- Wait for the reading to stabilise. If AUTO-HOLD is enabled, the display will lock and show "HOLD" once the reading has been stable for 10 seconds.
- Record your pH, EC, TDS, temperature, and salinity readings as displayed on screen.
- After each use, rinse the probe thoroughly with clean water and replace the protective sensor shield.
Store the meter with 3M KCL solution in the sensor cap to maintain probe moisture and extend probe lifespan.
Do not use this product in freezing conditions. Wait until the environment has warmed to room temperature before taking readings.
Replace the probe when readings become inconsistent or drift persists despite correct calibration. Probe lifespan is 1-3 years depending on frequency of use and maintenance.
Technical Specifications
expand_more
Technical Specifications
- Product Model AC-PHM7
- UPC Code 819137024212
- Measurements pH, EC, TDS, Temperature, Salinity
- pH Accuracy ±0.01
- Probe Type Lithium glass membrane (replaceable)
- Probe Lifespan 1-3 years
- IP Rating IP67
- Auto Shut-Off 8 minutes inactivity
- Auto-Hold Locks when stable for 10 seconds
- Calibration Solutions pH 4.00, pH 7.00, 12.88 mS, 1413 µS, 3M KCL storage solution
Resources
expand_more
Resources
Shipping & Returns
expand_more
Shipping & Returns
Check delivery options for the currently selected item and quantity.
Estimate is for this item and quantity only. Final whole-order freight is confirmed at checkout.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
