The AC Infinity CLOUDFORGE T3 V2 is a 4.5 L smart environmental humidifier designed specifically for grow room and grow tent applications, delivering precise, targeted moisture through an EC ultrasonic vaporiser that operates across 10 programmable humidity levels. Unlike conventional ultrasonic humidifiers, the T3 V2 is built with a water-resistant body seal and waterproof UIS ports to prevent leakage and protect against moisture ingress during continuous operation, extending the unit's long-term reliability in the demanding conditions of an active grow space.
The onboard controller features humidity and VPD triggers supported by a corded sensor probe, allowing the humidifier to respond dynamically to actual conditions inside the grow space rather than running on a fixed schedule alone. Onboard, growers can access four output levels; connecting a compatible UIS controller unlocks all 10 levels along with grow cycles, scheduling, remote app access, alerts, and CSV data export. The backlit LCD display shows live humidity readings and can be toggled off entirely to avoid disrupting the plant's dark cycle. An automatic shutoff activates when the tank runs dry, and backup memory retains all programming through power interruptions.
The extendable flexible tubing stretches to over 1.2 m (4 ft), enabling the unit to sit outside the tent while directing moisture precisely to the target zone inside. The corded sensor probe similarly allows remote humidity monitoring from outside the growing space. For a grower who needs to maintain precise humidity through any stage of the grow without placing equipment inside the canopy zone, the CLOUDFORGE T3 V2 sits on an exterior shelf and delivers via the extended tube without ever entering the grow space.
EC Ultrasonic Vaporiser
10-level cool mist output at 240 mL/h for precise moisture control.
VPD & Humidity Triggers
Onboard VPD and humidity programming responds to real-time probe readings.
UIS Compatible
Connects to UIS controllers for app control, grow cycles, and scheduling.
A 4.5 L smart plant humidifier with EC ultrasonic vaporiser, VPD triggering, extendable targeting tube, and UIS controller compatibility for app-based climate control.
EC ultrasonic vaporiser delivers 240 mL/h (8.11 fl oz/h) of fine cool mist at 38 dBA
10 humidity levels, 4 accessible onboard, all 10 unlocked with a UIS controller
Onboard VPD and humidity triggers with corded sensor probe for real-time monitoring
Extendable flexible tubing reaches over 1.2 m (4 ft) for targeted moisture delivery
Water-resistant body seal and waterproof UIS ports prevent leakage during operation
Backlit LCD display toggleable off to avoid disrupting the plant's dark cycle
Automatic shutoff when water tank is depleted, backup memory retains programming
UIS compatible, connects to AC Infinity controllers for app control, cycles, and scheduling
4.5 L tank supports up to 45 hours of continuous runtime
2-year warranty
Directions for Use
expand_more
Fill the 4.5 L tank with distilled water. Tap water is not recommended as mineral deposits can reduce the lifespan of the EC ultrasonic vaporiser and produce white dust in the grow space.
Position the unit outside or beside the grow tent to preserve internal growing space. Route the extendable tubing through a duct or vent opening and extend to over 1.2 m (4 ft) to direct moisture to the desired location.
Thread the corded sensor probe through a separate opening and position the probe tip at canopy height or the primary monitoring point inside the grow space.
Connect the power cord to a standard power outlet.
Use the onboard controller to set your target humidity level from the four available onboard levels. The display will show live humidity readings from the sensor probe.
Configure VPD triggers and timer programs on the controller as required.
To access all 10 humidity levels plus grow cycles, scheduling, and WiFi app control, connect the CLOUDFORGE T3 V2 to a compatible AC Infinity UIS controller.
Toggle the backlit display off during the plant's dark period to prevent light disruption, the unit will continue operating with the display off.
The automatic shutoff will activate when the tank is depleted. Refill with distilled water and the unit will restart automatically with all programming retained.
Clean the water tank regularly and descale the ultrasonic disc as needed to maintain output rate and prevent mineral build-up.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Low Stock - 2 available
Key Highlights
Directions for Use
Technical Specifications
Resources
