AC Infinity Ionbeam Supplemental LED
Four slim bars let the AC Infinity Ionbeam Supplemental LED reach the parts of a canopy that an overhead fixture can miss. Positioned beside, between or below foliage as plants fill out and overlap, they add useful light through shaded growth without forcing the main light closer to the entire crop. Two bar lengths are offered for different layouts; the choice is primarily physical reach, while the exact wattage, diode count and dimensions for each set remain in Technical Specifications.
Each sealed unibody bar carries Samsung LM301H EVO diodes on an aluminium board, combining 3000K and 5000K white light. AC Infinity rate the housing IP65 against dust and water jets, and credit the aluminium construction with moving heat away from the diode row. The four bars connect in series from one power adapter, with locking collars at the cable joints. Magnetic ends can grip a steel tent frame directly or clamp through canvas to the supplied steel mounting bars, while the included screws provide another option where the mounting surface is not magnetic.
The wired schedule controller provides ten intensity levels, clock-based operation and gradual sunrise or sunset transitions. In schedule mode, the ON level becomes the operating ceiling and the OFF level becomes the floor, so the OFF value must be set to zero when the bars need to go completely dark. The supplied UIS lead can connect the power adapter to a compatible UIS controller instead. AC Infinity publish close-range intensity guidance for supplemental use, but no PPF, PPFD map or coverage footprint for either model, so placement should be adjusted cautiously around the actual canopy rather than treated as a fixed coverage claim.
NOTE: These full-spectrum S-series bars do not emit ultraviolet light. AC Infinity instruct that the LEDs must not be stared at directly and that timer programming must not be relied on as the only means of isolating power. Unplug the power cord before installing, moving or servicing the set.
Light up the lower canopy your main fixture can't reach!
Sits Close To Plants
Dimmed, a bar can sit 25 mm from tissue.
Mounts And Moves Tool-Free
End magnets grip a steel bar through the canvas.
Runs Its Own Schedule
The wired controller schedules the daily on and off.
Low Stock - 1 available
30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.
AC Infinity Ionbeam Supplemental LED
Key Highlights
expand_more
Key Highlights
- Four bars per set: the S11 draws 28 W with 48 diodes, the S16 draws 42 W with 72 diodes
- Samsung LM301H EVO diodes, rated by AC Infinity at 3.14 µmol/J, mixing 3000K and 5000K into a full spectrum
- Sealed unibody housings with an aluminium LED board inside, rated IP65 against dust and water jets
- AC Infinity rate a life expectancy of 50,000 hours, with an operating range of 0 to 60 °C (32 to 140 °F) and 35 to 85% RH
- Cold-rolled steel mounting bars clamp magnetically through tent canvas, or the bars grip a steel tent pole directly
- The level set in OFF mode is the floor a SCHEDULE cycle dims to, so it must be set to zero for the bars to go fully dark
- Set includes the Dimming Schedule Controller, EC power adapter and UIS extension cord, plus four mounting bars, nine bar extension cords, eight wire mounts, eleven wood screws and four cable ties
- AC Infinity include mounting screws with both models so a set can serve as the primary light in a smaller grow space
Directions for Use
expand_more
Directions for Use
- Connect the single-corded light bar's female port to a dual-corded bar's male connector, then chain the remaining bars, securing every joint with its twist-on collar.
- Fit one of the nine bar extension cords into any link in the chain where the four bars need to sit further apart.
- Connect the EC power adapter's male connector to the free end of the chain, seating the gasket end of the UIS connector into the adapter.
- Use the UIS extension cord to connect the power adapter to the schedule controller, then plug the adapter into a wall outlet.
- For canvas mounting, set a steel mounting bar on the outside of the tent wall or ceiling and the light bar at the matching spot inside, then test that the magnetic grip through the canvas is secure before use.
- For pole mounting, place the bar's magnets directly on a steel tent pole and use the supplied hook and loop cable ties to fix the lighting angle and add security.
- For hard mounting, mark the holes through a mounting bar with the logo facing the wall, drill, insert wall anchors unless fixing into timber, screw the mounting bar down, then set the light bar's magnet ends onto it.
- Mount the controller on any steel surface using the magnet under its label, on a wall by the screw holes on its back, or on a Cloudlab controller plate, which is not included, using the supplied plate bolts.
- Set the current time in CLOCK mode, then set the running brightness in ON mode and, in OFF mode, the minimum level a SCHEDULE cycle will dim to.
- In SCHEDULE mode set an on clock-time and an off clock-time; the countdown begins once no button has been pressed for five seconds.
- In SUNSET/RISE mode set a ramp of 0:00 to 6:00 hours, which applies to both the brighten and the dim, then return to SCHEDULE mode for it to take effect.
- As supplemental lighting, match intensity to distance: 10% at 25 mm (1 in), 20 to 30% at 50 mm (2 in), 40 to 50% at 76 mm (3 in), 60 to 70% at 102 mm (4 in), 80 to 90% at 127 mm (5 in) and 100% at 152 mm (6 in).
- As primary lighting, AC Infinity's chart runs a static fixture at 100% from the peak of the space at every stage, or a dynamic fixture held 38 mm (1.5 in) from the canopy tip at 40% for seedlings, 80% through vegetative growth and 100% in flower.
- To run the set from a UIS controller, use the single included male-to-male UIS cord to connect the EC power adapter to a controller port in place of the bundled schedule controller; that controller then supplies the programming.
- Hold the mode button to lock the controller, hold up and down together for two seconds to reset the current mode, or hold mode with up and down for five seconds for a factory reset.
- Unplug the power cord before installing, servicing or moving the set; the on/off programming is not a means of isolating power.
Technical Specifications
expand_more
Technical Specifications
IONBEAM S11
- Product Model AC-NES11
- UPC Code 819137023352
- Power Usage 28 W per set of four bars
- Diodes Samsung LM301H EVO, 12 per bar, 48 per set
- Bar Dimensions 27.9 x 2.75 cm (10.98 x 1.08 in)
- Magnetic Mounting Bar Length 27.9 cm (10.98 in)
IONBEAM S16
- Product Model AC-NES16
- UPC Code 819137023369
- Power Usage 42 W per set of four bars
- Diodes Samsung LM301H EVO, 18 per bar, 72 per set
- Bar Dimensions 40.7 x 2.75 cm (16.02 x 1.08 in)
- Magnetic Mounting Bar Length 40.7 cm (16.02 in)
All Models
- Bars per Set 4 (one single-corded, three dual-corded)
- Set Contents 4 light bars, 4 magnetic mounting bars, schedule controller, EC power adapter, 9 bar extension cords, 1 UIS extension cord, 8 wire mounts, 11 wood screws, 2 controller plate bolts, 3 hex nuts, 4 hook and loop cable ties
- Diode Efficacy 3.14 µmol/J per diode
- Spectrum Full spectrum, 3000K + 5000K
- Intensity Levels 10
- Controller Modes OFF, ON, SCHEDULE, SUNSET/RISE, CLOCK
- Sunset/Rise Ramp 0:00 to 6:00 hours
- Housing Unibody housing with aluminium LED board, IP65
- Mounting Bars Cold-rolled steel, matte black powder coating
- Controller Dimensions 8.4 x 3.2 cm (3.31 x 1.26 in)
- Power Cord 253.4 cm (99.8 in)
- Bar Connector Cord 23.2 cm (9.1 in)
- UIS Extension Cord 304.8 cm (120 in), male to male
- Plug Type Australian
- Operating Humidity 35 to 85% RH
- Operating Temperature 0 to 60 °C (32 to 140 °F)
- Life Expectancy 50,000 hours
- Warranty 2 Years
Resources
expand_more
Resources
Shipping & Returns
expand_more
Shipping & Returns
Check delivery options for the currently selected item and quantity.
Estimate is for this item and quantity only. Final whole-order freight is confirmed at checkout.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
Colour: S11
