
Orders over $499

Hard-to-find varieties

Only the best for your grow


DIGI-LUMEN Side Bar 250W LED
The DIGI‑LUMEN Side Bar 250W LED is a dedicated supplemental lighting fixture designed to enhance canopy penetration and coverage in indoor grow setups. Featuring two high-efficiency side bars with a combined 672 single-mount LED diodes, this unit delivers a strong PPF of 662 µmol/s at just 250 watts, with an impressive efficacy of 2.65 µmol/J. It’s ideal for use in combination with top lighting systems or as standalone lighting in tight vertical spaces.
Constructed with durability and performance in mind, the Side Bar 250W features an IP45-rated, die-cast aluminium body and a wide 120° beam angle for effective side-light distribution. Whether you're increasing light to lower foliage or tailoring spectrum balance during key growth stages, this compact, low-profile fixture offers flexible positioning and consistent results with minimal heat output.

Efficient Lighting
2.65 µmol/J
Daisy Chain Ready
Connect multiple units
IP45 Rated
Humidity safeBoosts lower canopy development with targeted, efficient side lighting.
Sold out




DIGI-LUMEN Side Bar 250W LED
Key Highlights
expand_more

- 662 µmol/s total output from dual-bar configuration
- High efficacy rating of 2.65 µmol/J for efficient energy use
- 672 single-mount LED diodes ensure uniform side illumination
- 120° beam angle maximises wall-to-wall light distribution
- Slim profile ideal for tent sides or vertical farming racks
- IP45-rated die-cast aluminium body resists moisture and dust
- Over 50,000-hour LED lifespan with minimal maintenance
Directions for Use
expand_more

- Mount Fixture
Secure both light bars vertically or horizontally using compatible mounting brackets or adjustable bars. - Connect Power Lead
Plug the fixture into a 220–240 V AC power source using the supplied cable. - Position Light
Install approximately 30–60 cm from the plant canopy to target lower growth zones. - Set Orientation
Adjust bar angles as needed to maximise side penetration and uniformity. - Maintain Setup
Keep LED surfaces clean and inspect fittings regularly for optimal performance.
Technical Specifications
expand_more

- PPF @ 250 Watts (1 x 2 bar): 662 µmol/s
- PPF Efficacy: 2.65 µmol/J
- Model: Side Bar Array – 2 Bar Fixture
- Light Source: 672 x Single Mount Diodes LED's
- Input Voltage: 220–240 V AC
- Frequency Range: 50–60 Hz
- Power/Watts: 250 W
- Amps: 1.13 A
- Net Weight: 2.6 kg (per 2 bar fixture)
- Light Beam Angle: 120 Degrees
- Body Case Material: Die Cast Pressed Aluminium
- IP Rating: IP45
- Size: L-1105 mm × W-350 mm × H-53 mm
- Lifespan: >50,000 Hours
- Min. Operating Temp: -40°C
- Max. Operating Temp: 40°C
Shipping & Returns
expand_more

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.

Size: 250W

