FloraMax Flowering Enhancer Powder
Flowering is when your plants lean hardest on phosphorus, potassium, calcium and magnesium, and it's also when a drifting reservoir does the most damage. FloraMax Flowering Enhancer Powder is a three-in-one flowering additive made for that stretch. It gives a PK boost for bud swell, supplies calcium, magnesium and iron so you don't need a separate cal-mag product, and works as a pH stabiliser that helps hold your nutrient solution below pH 6.5. It's used only during flowering, and it's one of the core additives in a FloraMax feed.
Inside the bag is a pale yellow fine powder made from four ingredients: potassium phosphate, calcium nitrate, magnesium nitrate and iron DTPA. Potassium phosphate is the PK side of Flowering Enhancer. Its phosphorus carries the energy the plant spends building new flowers, and its potassium moves water and sugars into the buds as they fill out. Both get used heavily once buds start to build.
Calcium nitrate and magnesium nitrate let Flowering Enhancer take over the cal-mag job. The calcium goes into the cell walls of new growth. A plant can't move calcium from its old leaves to its new ones, so the buds forming now depend on a steady supply in the water. The magnesium sits at the centre of every chlorophyll molecule and keeps the leaves green and working while the flowers ripen. The iron comes as iron DTPA, a chelated form. The iron is bound in a structure that keeps it available in solution instead of reacting with other nutrients and dropping out of the roots' reach.
The pH stabiliser is the part that saves you work! FloraMax describe the blend as promoting bud swell and preventing deficiencies, and say it locks pH below 6.5 and improves pH stability by typically 500%, with that stabilising action working alongside the nutrients in the same bag. In flower, every nutrient in your reservoir is only as useful as its pH allows. As the solution creeps upward, iron and other trace elements get harder for the roots to take up, right when the buds are building.
As a dry ProPowder, Flowering Enhancer has to be measured by weight on scales, never by volume. FloraMax suggest a 3 kg scale that reads to 0.1 g for reservoirs from 10 L to 1,000 L. It can go straight into the reservoir or be dissolved first into a liquid stock concentrate. Every 200 g makes 1 L of stock, and that litre yields roughly 500 L of working solution. A 1 kg bag gives 5 L of stock, and the 4 kg bag four times that, 20 L. A pre-mix won't blend evenly, though, so the whole batch belongs in one lot of nutrient rather than being split across several. Keep the sealed bag below 30 C (86 F) so moisture stays out.
It sits alongside FloraMax Veg-1 ProPowder and the VegaFlora A+B system. With Root-XS, OrganaBud and Resin-XS, it's one of the four core additives in both FloraMax ProPowder Starter Kits. It already carries the PK boost and covers cal-mag, so it replaces those extra bottles in your feed, and no extra PK additives go in on top.
Bud swell, cal-mag and pH stability in one flowering powder!
Fuller Flowers
PK boost supports buds as they buildBuilt-In Cal-Mag Support
Calcium, magnesium and iron without a separate bottleSteadier Nutrient pH
Helps hold the reservoir in a workable range
Sold out
30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.



FloraMax Flowering Enhancer Powder
Key Highlights
expand_more
- Three-in-one - PK boost, cal-mag-iron and pH stabiliser in one bag
- Potassium phosphate base for the flowering PK boost
- Chelated iron DTPA with calcium and magnesium nitrate
- Holds feed pH under 6.5
- Every 200 g makes 1 L of stock concentrate, about 500 L of feed
- Feed as a dry powder or as a liquid stock
- Core additive in both FloraMax ProPowder Starter Kits
Directions for Use
expand_more
Application Rate
- Hydroponics (dry powder): 0.4 - 0.8 g/L
- Hydroponics (liquid stock): 2 - 4 ml/L
Application
- Use during flowering only.
- Weigh the powder on scales, never by volume - a 3 kg x 0.1 g scale suits reservoirs of 10 L - 1,000 L. To make a liquid stock concentrate, make each 200 g up to 1 L.
- Fill the reservoir with water first. If using Pythoff PLUS, add it before other nutrients, and stir well after every addition.
- When combining with other ProPowders as a dry pre-mix, put the whole pre-mix into one nutrient batch, as it is not homogenous. Store any pre-mix air-tight, away from direct sunlight and preferably below 25 C (77 F).
- Maintain a final pH between 5.0 and 6.3.
- Never pre-mix liquid products, and do not add extra PK additives, chlorine or peroxide.
Safety
DANGER. Causes serious eye damage, and permanent eye damage including blindness could result. Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. May cause irritation if inhaled.
Wear suitable protective clothing, including gloves and eye or face protection, wherever skin or eye contact is a risk when mixing or handling. Wear respiratory equipment if ventilation is insufficient.
Wash hands thoroughly after handling.
If swallowed: rinse mouth and immediately give large volumes of water. Do not induce vomiting. Call a doctor immediately.
If in eyes: hold open and wash with running water for at least 15 minutes, lifting the eyelids occasionally, and seek medical attention.
If on skin: wash with water and remove contaminated clothing. Launder contaminated clothing before reuse.
If inhaled: move to fresh air and call a physician if symptoms develop or persist.
Store in the original container away from direct sunlight and below 30 C (86 F), keeping the packet well sealed to minimise moisture ingress.
Shipping & Returns
expand_more
Check delivery options for the currently selected item and quantity.
Estimate is for this item and quantity only. Final whole-order freight is confirmed at checkout.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
Size: 200 g
Visit Us In-Store: 2/322 Hobart Rd, Youngtown TAS