Visit Us In-Store: 2/322 Hobart Rd, Youngtown TAS
Pro-Leaf Multi-Function Environmental Controller BECC-B2
The Pro-Leaf Multi-Function Environmental Controller BECC-B2 controls temperature, humidity and CO2 for an indoor grow room or tent from one unit. You don't need a separate thermostat, humidistat and CO2 controller, each watching its own reading. One controller holds all three setpoints and switches the equipment that keeps the room on target. It has four dedicated outlets, one each for cooling, heating, humidity and CO2 devices, so the whole climate is run from a single front panel.
Each setpoint has its own control knob on an analogue dial interface, with digital readout displays beside them. You set the target and check the current reading in the same place. Readings come from a remote sensor on its own lead, so the sensor can sit out in the growing area while the controller stays mounted somewhere easy to reach. The sensor also has a built-in photocell for day/night switching, which tells the controller directly whether the lights are on. CO2 is handled by fuzzy-logic control designed for compressed CO2 systems. A basic on/off controller opens the gas fully as soon as the reading drops below target and shuts it again at the setpoint. Fuzzy logic instead looks at how far the reading is from the target and how fast it is moving, then adjusts delivery to suit. The aim is a steadier CO2 level with less overshoot.
CO2 can be held at enriched levels up to 2000 ppm, and temperature and humidity each work across a wide control range. Each outlet has one job, so every device goes into the outlet for its role and the controller switches it only when its own reading calls for it. Sensor placement drives every decision the controller makes. Put the sensor somewhere that reflects conditions at the canopy, not right beside a heater, a fan outlet or the CO2 delivery point.
NOTE: This controller switches a compressed CO2 supply. Always follow the safety instructions supplied with the cylinder, regulator and any other CO2 equipment it controls.
Temperature, humidity and CO2, all handled from one controller!
Dedicated Device Outlets
Cooling, heating, humidity and CO2 each switched separately
Smoother CO2 Dosing
Fuzzy logic eases gas towards the setpoint
Day and Night Sensing
Built-in photocell tells the controller when lights run
Sold out
30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.
Pro-Leaf Multi-Function Environmental Controller BECC-B2
Key Highlights
expand_more
Key Highlights
- Temperature, humidity and CO2 managed from a single unit
- Four outlets, one each for cooling, heating, humidity and CO2
- Fuzzy-logic CO2 control built for compressed gas systems
- Photocell in the remote sensor for automatic day/night switching
- Separate knob for each setpoint, with digital readouts
Directions for Use
expand_more
Directions for Use
Safety
Handle the compressed CO2 cylinder and regulator according to the instructions supplied with that equipment.
Keep the controller and the equipment plugged into it clear of water and spray.
Technical Specifications
expand_more
Technical Specifications
- Product Model BECC-B2
- Temperature Control Range 5 - 50 °C (41 - 122 °F)
- Humidity Control Range 5 - 95% RH
- CO2 Control Range 400 - 2000 ppm
- CO2 Reading Accuracy ±100 ppm
- CO2 Control Method Fuzzy logic, for compressed CO2 systems
- Switched Outlets 4 (cooling, heating, humidity, CO2)
- Day/Night Detection Integrated photocell in remote sensor
- Interface Analogue dials with dedicated temperature, humidity and CO2 knobs, digital readout displays
- Remote Sensor Cable Length 4.5 m (14.8 ft)
Shipping & Returns
expand_more
Shipping & Returns
Check delivery options for the currently selected item and quantity.
Estimate is for this item and quantity only. Final whole-order freight is confirmed at checkout.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
