Orders over $499
Hard-to-find varieties
Only the best for your grow
AC Infinity Ionbeam U2 UV Supplemental LED
The AC Infinity Ionbeam U2 UV Supplemental LED is the targeted-spectrum specialist of the Ionbeam family: a two-bar kit emitting only in the UVA band, at 365 nm and 395 nm, wavelengths that standard white LED fixtures barely produce. AC Infinity state that UVA simulates the ultraviolet component of natural sunlight, drawing out plant expressions and enhancing fruit and flower development, and they recommend it strictly as a flowering-stage supplement to a primary light rather than a fixture in its own right. Where the full-spectrum AC Infinity Ionbeam S11 Supplemental LED adds general canopy light, the U2 adds one specific band with one specific job.
Each 27.9 x 2.75 cm (10.98 x 1.08 in) bar carries 12 UV diodes, 24 across the pair, split between the two wavelengths, and the set draws 15 W. Both bars share the family's sealed IP65 aluminium shell, snapping magnetically onto the included powder-coated steel mounting bars through the canvas or straight onto the tent frame. The wired Dimming Schedule Controller provides ten intensity levels with ON, SCHEDULE, SUNSET/SUNRISE and CLOCK modes, and here the scheduling is the whole point, because UV is applied as a measured dose rather than left running by default. AC Infinity's guidance is to run the U2 during flowering only, either a few hours a day or across the entire daily light cycle, mounted at least 30 cm (1 ft) above the canopy. Coverage scales with intensity, from 60 x 60 cm (2 x 2 ft) at level 5 up to 60 x 120 cm (2 x 4 ft) or 90 x 90 cm (3 x 3 ft) at level 10.
Power comes from an EC adapter on a 253.4 cm (8 ft) cord, and the included 304.8 cm (10 ft) male-to-male UIS cord passes scheduling to a UIS controller for automated dosing windows alongside fans and other gear. The kit includes one single-corded and one dual-corded bar, two magnetic mounting bars, the schedule controller, power adapter, three bar extension cords and mounting hardware. At full intensity its coverage tops out at 90 x 90 cm, matching a tent like the AC Infinity Cloudlab 733 Grow Tent 0.9 x 0.9 x 1.8 m; larger rooms sit outside its rating. Scheduled from its own controller or through the UIS ecosystem, the U2 layers a timed UVA dose over the flowering window without touching the primary light's settings.
NOTE: never stare directly at the lit fixture, and wear UV-rated eye protection when working under ultraviolet lighting; avoid prolonged exposure of bare skin. Mount at least 30 cm (1 ft) above the canopy and run only during the flowering stage per AC Infinity's guidance.

Targeted UVA Band
24 diodes at 365 nm and 395 nm add the ultraviolet missing from white LEDs.
Dose by Schedule
The wired controller times UV windows across the flowering light cycle at ten intensity levels.
IP65 Aluminium Build
Sealed unibody bars mount magnetically and handle tent humidity without complaint.
Back-Order
Free delivery:
on all orders over
$499!
2 Years warranty · 30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.

AC Infinity Ionbeam U2 UV Supplemental LED
Key Highlights
expand_more
- 24 UVA diodes across two bars, split between 365 nm and 395 nm wavelengths
- AC Infinity recommends flowering-stage use only, a few hours daily or the full light cycle
- Covers 60 x 60 cm (2 x 2 ft) at level 5, up to 90 x 90 cm (3 x 3 ft) at level 10
- Minimum mounting height of 30 cm (1 ft) above the canopy
- Wired schedule controller with ten intensity levels for measured UV dosing
- 15 W set draw in IP65 sealed unibody aluminium housings with magnetic mounting
- Pairs with UIS controllers via the included 304.8 cm (10 ft) cord for automated dosing windows
- 50,000 hour life expectancy and a 2 year manufacturer warranty
Directions for Use
expand_more
- Install only for the flowering stage, following AC Infinity's usage guidance.
- Fix the two magnetic mounting bars at least 30 cm (1 ft) above the canopy, through the canvas or on the tent frame.
- Snap the bars on, connect them with the included extension cords, and plug into the schedule controller and power adapter.
- Match intensity to coverage: level 5 for 60 x 60 cm (2 x 2 ft), level 10 for 60 x 120 cm (2 x 4 ft) or 90 x 90 cm (3 x 3 ft).
- Use SCHEDULE mode to run the bars for a few hours a day, or across the full daily light cycle, per AC Infinity's recommendation.
- Wear UV-rated eye protection whenever working under the lit bars and avoid direct skin exposure.
- For automated dosing windows, connect the power adapter to a UIS controller with the included male-to-male cord.
Technical Specifications
expand_more
- Product Model: AC-NEU11-2
- UPC Code: 819137024090
- Diodes: 24 UV chips (12 per bar)
- Wavelengths: 365 nm + 395 nm (UVA)
- Power Usage: 15 W (per set of 2 bars)
- Coverage: 60 x 60 cm (2 x 2 ft) at level 5; 60 x 120 cm (2 x 4 ft) or 90 x 90 cm (3 x 3 ft) at level 10
- Minimum Mounting Height: 30 cm (1 ft) above the canopy
- Intensity Levels: 10
- Controller Modes: OFF, ON, SCHEDULE, SUNSET/SUNRISE, CLOCK
- Housing: Unibody aluminium, IP65
- Mounting: Magnetic steel mounting bars (included), wall-mount screws
- Bars per Set: 2
- Bar Dimensions: 27.9 x 2.75 cm (10.98 x 1.08")
- Controller Dimensions: 8.4 x 3.2 cm (3.31 x 1.26")
- Power Cord: 253.4 cm (8 ft)
- UIS Extension Cord: 304.8 cm (10 ft), male to male
- Operating Humidity: 35-85% RH
- Operating Temperature: 0 to 60°C (32 to 140°F)
- Life Expectancy: 50,000 hours
- Warranty: 2 Years
Resources
expand_more
Shipping & Returns
expand_more
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
Size: 15 W