AC Infinity Multifan USB Axial Fan
The AC Infinity Multifan USB Axial Fan is a quiet USB-powered fan for circulating air around grow spaces, equipment shelves and warm electronics, offered in three frame sizes and two dual-fan configurations. It is the sizing range of the Multifan family: the AC Infinity Multifan Mini USB Axial Fan covers the micro spaces these frames cannot enter, the AC Infinity Multifan USB Centrifugal Blower handles shelves with no clearance above the gear, and the axial series matches frame to space - an 80 mm unit for a shelf corner, a 140 mm unit for the widest quiet sweep, or a dual set cooling two spots from a single USB port.
Each unit pairs an axial impeller with dual ball bearings rated for a 67,000 hour L10 lifespan, housed in a 2.5 cm (1.0 in) deep frame with a wire guard on both faces and eight detachable anti-vibration silicone feet. The S1 spins an 80 mm blade at 2000 RPM to move 44 m³/h (26 CFM) at a manufacturer-rated 17 dBA on 1.1 W; the S3 turns a 120 mm blade at 1300 RPM for 88 m³/h (52 CFM) at 18 dBA; the S4 swings the largest 140 mm blade at 1200 RPM for 97 m³/h (57 CFM), also at 18 dBA. The dual configurations join two fans with a 76 cm (2.5 ft) cord: the S5 pairs two 80 mm fans for a combined 88 m³/h (52 CFM), while the S7 pairs two 120 mm fans for a combined 177 m³/h (104 CFM) at a rated 19 dBA and 2.9 W. Power comes from any 5 V DC USB port rated 500 mA or higher, through a 132 cm (4 ft) cord carrying an inline three-speed controller and a further 69 cm (2 ft) run from controller to fan.
An extra USB port on each fan body allows up to four fans to share one power source, with chained fans following the controller nearest the supply; the dual S5 and S7 count as two fans each. Every model mounts horizontally or vertically and flips over to switch between intake and exhaust duty, operating anywhere from -18 to 70°C (0 to 158°F) and 35 to 85% relative humidity. These are standalone USB devices with no UIS connectivity, so where a grow space calls for sensor-driven canopy circulation the mains-powered AC Infinity Cloudray S Oscillating Axial Clip Fan is the step up. Available in S1, S3, S4, S5 and S7 models spanning 44 to 177 m³/h (26 to 104 CFM). Its dual-fan configurations put moving air on two pieces of equipment at once while drawing no more than 2.9 W from a single USB port.
NOTE: USB fans are ineffective in fully sealed enclosures - air must be able to flow in and out of the space through vents or openings. Multifan units are not designed for outdoor use, filter attachment or through-wall mounting, and splicing or hardwiring the USB cords voids the warranty.
Quiet USB circulation from 80 mm to 140 mm frames, with dual-fan configurations that cool two spots from a single USB port.
Five Fan Configurations
Single 80, 120 and 140 mm frames plus dual sets that run two fans from one cord.
Three-Speed Control
An inline controller on every cord switches between off, low, medium and high without unplugging.
Powered by USB
Runs from any USB port rated 500 mA or higher, drawing no more than 2.9 W.
Back-Order
2 Years warranty · 30-day returns
Secure checkout
with
Buy with confidence
-
Talk to a real grower
Not sure it suits your setup? Call our Youngtown team on
0481 526 666.
-
Price Beat Guarantee
Found it cheaper elsewhere? We'll
beat any competitor's price by 5%.
-
Tasmania's own hydroponics shop
Buy online & collect in-store at 2/322 Hobart Rd, Youngtown TAS, usually within the hour.
AC Infinity Multifan USB Axial Fan
Key Highlights
expand_more
Key Highlights
- Five configurations: single 80, 120 and 140 mm frames plus dual 80 mm (S5) and dual 120 mm (S7) sets
- Family airflow spans 44 to 177 m³/h (26 to 104 CFM) at manufacturer-rated noise of 17 to 19 dBA
- Dual S5 and S7 sets place two fans up to 76 cm (2.5 ft) apart off one USB port and one controller
- Extra USB port on each fan daisy-chains up to four fans from a single power source
- Dual ball bearings carry a 67,000 hour L10 rated lifespan
- Eight detachable anti-vibration silicone feet per fan; flips for intake or exhaust and mounts in any orientation
- Operates from -18 to 70°C (0 to 158°F) and 35 to 85% relative humidity
Directions for Use
expand_more
Directions for Use
- Position the fan on its anti-vibration silicone feet beside the equipment or space to be cooled, or remove the feet and screw the frame into place through the corner mounting holes.
- Orient the fan for intake or exhaust duty; flipping the unit over reverses the direction of airflow.
- For dual S5 and S7 sets, place the second fan where it is needed, up to 76 cm (2.5 ft) from the first along the joining cord.
- Plug the USB connector into a dedicated port rated 500 mA or higher.
- Set the inline controller to low, medium or high; the same switch provides the off position.
- To daisy-chain, plug additional Multifan units into the USB port on the fan body, up to four fans per power source, and set the chained fans to high; dual units count as two fans.
- Keep both faces of the fan clear and never stack objects on top of the unit.
Technical Specifications
expand_more
Technical Specifications
Multifan S1 (Single 80 mm)
- Product Model AI-MPF80A
- UPC Code 854759004327
- Fan Unit ACX-FD8025(B)05W5
- Airflow 44 m³/h (26 CFM)
- Noise Level 17 dBA
- Fan Speed 2000 RPM
- Static Pressure 1.6 mm H2O
- Power 1.1 W (0.22 A)
- Frame Dimensions 8.0 x 8.0 x 2.5 cm (3.2 x 3.2 x 1.0 in)
- Dimensions with Feet 9.1 x 9.1 x 4.6 cm
- Mounting Hole Spacing 7.1 cm (2.8 in)
Multifan S3 (Single 120 mm)
- Product Model AI-MPF120A
- UPC Code 854759004310
- Fan Unit ACX-FD1225(B)05W5
- Airflow 88 m³/h (52 CFM)
- Noise Level 18 dBA
- Fan Speed 1300 RPM
- Static Pressure 1.0 mm H2O
- Power 1.6 W (0.32 A)
- Frame Dimensions 12.0 x 12.0 x 2.5 cm (4.7 x 4.7 x 1.0 in)
- Dimensions with Feet 12.4 x 12.4 x 4.6 cm
- Mounting Hole Spacing 10.5 cm (4.14 in)
Multifan S4 (Single 140 mm)
- Product Model AI-MPF140A
- UPC Code 854759004365
- Fan Unit ACX-FD1425(B)05W3
- Airflow 97 m³/h (57 CFM)
- Noise Level 18 dBA
- Fan Speed 1200 RPM
- Static Pressure 0.84 mm H2O
- Power 1.5 W (0.3 A)
- Frame Dimensions 14.0 x 14.0 x 2.5 cm (5.5 x 5.5 x 1.0 in)
- Dimensions with Feet 14.5 x 14.5 x 4.6 cm
- Mounting Hole Spacing 12.5 cm (4.92 in)
Multifan S5 (Dual 80 mm)
- Product Model AI-MPF80A2
- UPC Code 854759004334
- Fan Units ACX-FD8025(B)05W5 x 2
- Configuration two 80 mm fans joined by a 76 cm (2.5 ft) cord
- Airflow 44 m³/h (26 CFM) per fan; 88 m³/h (52 CFM) combined
- Noise Level 18 dBA
- Fan Speed 2000 RPM
- Static Pressure 1.6 mm H2O
- Power 1.1 W per fan; 0.38 A total
- Frame Dimensions (per fan) 8.0 x 8.0 x 2.5 cm (3.2 x 3.2 x 1.0 in)
- Dimensions with Feet (per fan) 9.1 x 9.1 x 4.6 cm
- Mounting Hole Spacing 7.1 cm (2.8 in)
Multifan S7 (Dual 120 mm)
- Product Model AI-MPF120A2
- UPC Code 854759004341
- Fan Units ACX-FD1225(B)05W5 x 2
- Configuration two 120 mm fans joined by a 76 cm (2.5 ft) cord
- Airflow 177 m³/h (104 CFM) combined
- Noise Level 19 dBA
- Fan Speed 1300 RPM
- Static Pressure 1.0 mm H2O
- Power 2.9 W total (0.58 A)
- Frame Dimensions (per fan) 12.0 x 12.0 x 2.5 cm (4.7 x 4.7 x 1.0 in)
- Dimensions with Feet (per fan) 12.4 x 12.4 x 4.6 cm
- Mounting Hole Spacing 10.5 cm (4.14 in)
All Models
- Power Input USB, 5 V DC (operating range 3 to 7 V DC); requires a port rated 500 mA or higher
- Speed Controller inline 3-speed (off / low / medium / high)
- Daisy-Chaining extra USB port on each fan; up to four fans per USB power source (dual units count as two)
- Bearings dual ball bearings, 67,000 hour L10 rated life
- Mounting horizontal or vertical; reverse the fan for intake or exhaust
- Feet eight detachable anti-vibration silicone feet per fan
- Cord Lengths 132 cm (4 ft) USB plug to controller; 69 cm (2 ft) controller to fan
- Operating Environment -18 to 70°C (0 to 158°F), 35 to 85% RH
- Certifications UL cUL Recognized E503903 (fan unit, UL-507), CE, RoHS
- Warranty 2 Years
Resources
Shipping & Returns
expand_more
Shipping & Returns
Check delivery options for the currently selected item and quantity.
Estimate is for this item and quantity only. Final whole-order freight is confirmed at checkout.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@hydrooasis.com.au
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@hydrooasis.com.au.
Size: 120 mm - S7
