FREE SHIPPING icon
FREE SHIPPING

Orders over $499

RARE & EXOTIC PLANTS icon
RARE & EXOTIC PLANTS

Hard-to-find varieties

PREMIUM QUALITY icon
PREMIUM QUALITY

Only the best for your grow

chevron_left chevron_right
Horticulture Industry Updates

Research news

Can pineapples be forced to flower with less calcium carbide?

By Hydro Oasis ·

Rows of spiky grey-green pineapple plants growing on red soil in a field, with banana plants and trees behind
Pineapple plants in a field in Uganda (not from this study). Pineapple plantation 03. Photo: Ssemmanda will, via Wikimedia Commons, CC BY-SA 4.0.

In field trials in southern Benin, Sugarloaf pineapples given 25% less calcium carbide, mixed with activated charcoal or fine clay, reached 100% flowering.

Pineapple growers often trigger flowering with a chemical so that a whole field flowers, and is harvested, at about the same time. In Benin most growers still do it with calcium carbide, which the researchers describe as harmful to human health and the environment, so a team from the University of Abomey-Calavi set out to find out whether less carbide, or a different mix, could do the same job without hurting the fruit (Linkpon et al., 2026).

What this means for your grow

If you grow pineapples and force them to flower, this study suggests the dose of calcium carbide can come down by a quarter when it is mixed with activated charcoal or fine clay, and that a low dose of Ethrel (ethephon) mixed with urea and sodium bicarbonate also worked well. The treatments also changed fruit size and the number of slips (the young plants used for replanting): the Ethrel mix that gave the biggest fruit also gave fewer slips, while 0.75% carbide with activated charcoal gave as many slips as the growers' usual carbide treatment. This was one cultivar, Sugarloaf, in commercial fields in Benin, and the authors say leaf burn from the urea mixes needs more assessment before broader recommendations for farmers, so it is not a home recipe.

What did the team do?

The team ran two experiments on farmers' fields in the municipality of Zè, in southern Benin, using Sugarloaf (locally called Pain de Sucre), the most grown pineapple cultivar in southern Benin. The plants were induced 13 months after planting in the first experiment and 11 months after planting in the second.

Each plant got one dose of 50 mL of solution applied to the centre of its leaf rosette, in the evening, using a homemade backpack applicator of the kind growers in Benin commonly use. The 18 treatments fell into a few groups:

  • The comparisons: no treatment; calcium carbide at 1%, the growers' usual practice; and activated charcoal enriched with ethylene, known as TIFBio, the approach the government promotes for organic pineapple production.
  • Less carbide: calcium carbide at 0.5% or 0.75% (25% to 50% less), mixed with 0.5% activated charcoal or 0.5% fine clay, plus one mix of 0.75% carbide with petroleum, a practice some growers already use.
  • Ethrel: Ethrel at 500 ppm on its own, and Ethrel at 50 to 300 ppm mixed with urea, or with urea and sodium bicarbonate, plus one mix of Ethrel 200 ppm with activated charcoal.

They counted how many plants showed a "red heart" (the reddish centre of the rosette that marks the start of flowering) every five days from 30 to 75 days after treatment, then measured the fruit, crown and slips at harvest, along with the juice's pH and total soluble solids (a measure of sugar content, in °Brix).

What did they find?

  • Untreated plants barely flowered: fewer than 10% did. Both the growers' carbide treatment and TIFBio brought more than 90% into flower by 75 days.
  • The alternatives worked too: they ended with 85% to 100% of plants flowering after 75 days, and they were not significantly different from the growers' carbide practice.
  • Less carbide was enough: 0.75% carbide with activated charcoal, 0.5% carbide with fine clay and 0.75% carbide with fine clay each gave 100% flowering, and 0.5% carbide with activated charcoal gave 95%.
  • Ethrel mixes did well: Ethrel with urea, or with urea and sodium bicarbonate, gave 98% to 100% flowering, against 98% for Ethrel at 500 ppm on its own.
  • Bigger fruit with one Ethrel mix: across the two experiments, Ethrel 200 ppm with 4% urea and 0.4% sodium bicarbonate gave the longest fruit (40.12 cm, including the crown) and the heaviest (1537.9 g), with a short crown (17.85 cm) and the lightest crown.
  • But fewer slips: several Ethrel treatments, including that one, gave the fewest slips, while several carbide treatments, including the growers' 1% carbide, gave the most. Ethrel at 500 ppm on its own gave the fewest of all.
  • Sugar content stayed above the market minimum: average total soluble solids ran from 13.09 to 14.34 °Brix in the first experiment and 13.52 to 14.75 °Brix in the second, all above the 12 °Brix minimum in the Codex Standard for Pineapples. The authors note that sweetness also depends on acidity and would need a taste panel to judge.
  • Leaf burn with urea: plants given the urea mixes showed leaf burn in the heart of the plant, particularly at high urea doses. The paper describes it as severe in one place and minor in another, and says the affected plants recovered within about 2 weeks; the burn was not scored, so how bad it was is unclear.

How vigorous the plant was when it was induced (D-leaf length times the number of functional leaves) also mattered: it had a significant effect on fruit length and weight.

What could it mean?

The authors conclude that both reduced-carbide and Ethrel-based mixes can induce flowering in Sugarloaf pineapple, and they single out two: 0.75% calcium carbide with 0.5% activated charcoal, and Ethrel 200 ppm with 4% urea and 0.4% sodium bicarbonate. They add that the leaf burn seen with high urea concentrations warrants caution, and that it needs proper assessment before broader recommendations for farmer adoption. Right now this is most useful to commercial pineapple growers and advisers looking at ways to use less calcium carbide, rather than something to try at home.

What were the limitations?

The authors note that the leaf burn was not systematically scored, so its extent and effects are not yet known. The carbide and petroleum mix was applied incorrectly by workers in the second experiment and was left out of the combined analysis. Gas exchange and ethylene levels inside the rosette were not measured, so how petroleum works is a guess. Juice pH differed between treatments, but without a taste panel the authors cannot say whether that changes eating quality. The authors suggest plant vigour and weather may affect how well a treatment works: the second experiment flowered earlier, which the authors suggest may be due to water stress around the time of induction.

Trial details

  • Where: two farmers' fields on ferralitic soil at Anavié (1600 m2) and Housagoudo (2000 m2), municipality of Zè, Atlantic department, southern Benin. Facility type: field.
  • Who: Genetics, Biotechnology and Seed Science Unit (GBioS), Faculty of Agricultural Sciences, University of Abomey-Calavi, Benin.
  • Crop: pineapple (Ananas comosus) cultivar Sugarloaf; induced at 13 months (experiment 1) and 11 months (experiment 2) after planting.
  • How long: experiment 1 ran from March 2023 to December 2023 (planted April 2022); experiment 2 from July 2023 to January 2024 (planted August 2022). Harvest at 153 to 160 and 156 to 161 days after induction.
  • System: flat beds of two alternating rows; 30 cm between plants, 40 cm between rows and 60 cm between double rows; 66,666 plants per hectare (plants ha−1). Manual weeding before fertiliser and induction.
  • Nutrition: urea (46% N) and/or N 20 P 10 K 10 at 10 g per plant (the quantity given in the paper's table): once before the trial in experiment 1 and twice in experiment 2, then once more after the trial began in each.
  • Treatments: 18, applied once as 50 mL of solution into the centre of the leaf rosette in the evening, with no rain in the following 24 h: no application; calcium carbide 1% (22.5 kg per hectare); activated charcoal enriched with ethylene (TIFBio); calcium carbide 0.5% or 0.75% with activated charcoal 0.5% or fine clay 0.5%; calcium carbide 0.75% with petroleum; Ethrel 500 ppm; Ethrel 300, 200, 100 or 50 ppm with urea (4.5%, 4%, 3% or 2%), with or without sodium bicarbonate 0.4%; Ethrel 200 ppm with activated charcoal 0.5%.
  • Design: randomised complete block design with four blocks; 24 plants per plot; 1728 plants per experiment. ANOVA, linear mixed-effects models with plant vigour as a covariate, a Poisson mixed model for slips, and Tukey's and LSD tests at the 5% level.
  • Results: flowering at 75 days under 10% untreated and over 90% with calcium carbide 1% and TIFBio; 85% to 100% with the alternatives, not significantly different from calcium carbide 1% (p = 0.53 in experiment 1, p = 0.07 in experiment 2); Ethrel 200 ppm + urea 4% + sodium bicarbonate 0.4% gave total fruit length 40.12 cm, infructescence length 22.27 cm, crown length 17.85 cm, total fruit weight 1537.9 g and infructescence weight 1425.4 g; juice pH 3.42 to 3.67 (experiment 1) and 3.96 to 4.06 (experiment 2); total soluble solids 13.09 to 14.34 °Brix (experiment 1) and 13.52 to 14.75 °Brix (experiment 2).
  • Funding and conflicts: funded by the Genetics, Biotechnology and Seed Science Unit (GBioS), Faculty of Agricultural Sciences, University of Abomey-Calavi. The authors declare no conflicts of interest.
  • Publication: Plant-Environment Interactions 7(6): e70234, published 13 November 2026, https://doi.org/10.1002/pei3.70234. Licence: CC BY 4.0.
  • Not reported in the paper: irrigation; temperature and rainfall as figures (shown only in a chart); fruit weights for each treatment (shown only in charts, apart from the treatment above); slip counts for any treatment (shown only in charts); a score for leaf burn; costs of the treatments.

Links

References
  1. Linkpon, O. L. F., Fassinou Hotegni, N. V., Sohindji, F. S., Houessou, G., Ahokpossi, B., Salaou, M. A. B., Adjé, C. A. O., & Achigan-Dako, E. G. (2026). Artificial flowering induction practices in pineapple (cv. Sugarloaf) production in southern Benin: Comparative analysis of effectiveness of induction agents and effects on fruit quality. Plant-Environment Interactions, 7(6), e70234. https://doi.org/10.1002/pei3.70234

Leave a comment

Please note, comments need to be approved before they are published.